| LAW |
Laube Allen Wrench
Allen Wrench fits set screws in Laube housings and drive post. 2-56
|
|
|
|
| LAWSS |
Laube Allen Wrench Set Screws (4 EA)
Set screws used in the assembly of Laube housings and on drive posts. Pack of 4.
|
|
|
|
| SE5100090000 |
Laube Hinge Screws (Pair of 2)
Set of two hinge screws fit all Laube Professional Clippers.
|
|
|
|
| SE5100020000 |
Laube Nameplate Screws (Pair of 2)
Pair of 2 screws fit all Laube nameplates.
|
|
|
|
| LSTREL |
Laube Strain Relief Fitting
Flexible fitting provides stress relief for cord entry into housing.
|
|
|
|
| SE5135008 |
SuperDuty Drive Lever for all exc Cowboy
Improved Super Duty Drive Lever for all Laube models except Cowboy - New since 2008. Note front and back views
|
|
|
|
| SE5135042 |
Leverlast Drive Lever for all exc/Cowboy
Leverlast Drive Lever for all exc/Cowboy. Fits
clippers made before 2008. Note front and back views.
|
|
|
|
| SE5110066 |
SuperDuty Drive Lever for Cowboy only
Super Duty Drive Lever fits Cowboy and Mini Cowboy - New since 2008
|
|
|
|
| LEDB |
Laube Enduro Drive Bearing
OEM. Tough, long lasting high speed bearing that drives the drive lever. Should be replaced when replacing drive lever. Fits all models.
|
|
|
|
| SE5100050000 |
Laube Hinge Assembly
Laube Hinge fits Lazor, Mini Lazor, Cowboy, Mini Cowboy, Litening, Mini Micro and IVAC.
|
|
|
|
| SE5110020 |
Hinge Latch for all models exc Cowboy
Fits all Laube models except Cowboy and Mini Cowboy.
|
|
|
|
| SE5100045550 |
Laube Hinge Latch for Cowboy
Latch fits Cowboy and Mini Cowboy only
|
|
|
|
| LSFRB |
Laube Speed Feed Replacement Blades
OEM. Replacement SS Speed Feed Blades
|
|
|
|
| SE5135000 |
Tune Up Kit for Lazor, Mini Lazor, Mini Micro
Tune up kit contains new NamePlate, pivot bearing, drive lever, Enduro bearing and a pillow of Laube High Performance grease
|
|
|
|
| SE5110088000 |
Tune Up Kit for Cowboy
Tune Up Kit for Cowboy and Mini Cowboy. Contains new nameplate with pivot bearing and
drive lever, Enduro Bearing and pillow of High performance grease
|
|
|
|
| SE51351000 |
Tune Up Kit for Litening
Tune up kit contains new NamePlate, pivot bearing, drive lever, Enduro bearing and a pillow of Laube High Performance grease. Fits all Litening models.
|
|
|
|
| LSFB |
Laube Replacement Battery for Speed Feed
OEM Replacement Lithium batter for Speed Feed
|
|
|
|
| SE5135200 |
Tune Up Kit for IVAC
Tune up kit contains new NamePlate, pivot bearing, drive lever, Enduro bearing and a pillow of Laube High Performance grease. Fits all IVACs
|
|
|
|
| SE50210 |
Laube VAC-PAC for Lazor, Mini Lazor, Mini Micro
Turns your Laube into a "clipper-vac" clipper. Very easy installation. Hooks up to popular vac systems. Comes with new drive lever, pivot bearing, Enduro bearing and vacuum snorkel.
|
|
|
|
| SE50228 |
Laube VAC-PAC for Litening
Turns your Litening into a "clipper vac" system. Connects to all popular vac systems. Includes vacuum snorkel, nameplate w/pivot bearing and new drive lever, new Enduro bearing and a pillow of Laube High Performance grease.
|
|
|
|
| KLB002 |
Laube Variable Speed Switch & Circuit Board Assy
OEM. Variable Speed switch/board assembly fits Lazor, Mini Lazor, Cowboy, Mini Cowboy, Mini Micro, Litening. Not available for IVAC. Requires solder installation.
|
|
|
|
| KLB005 |
Laube 2speed Switch & Circuit Board Assembly
OEM 2 speed switch. Fits Lazor, Mini Lazor, Cowboy, Mini Cowboy, Mini Micro, Litening and IVAC.
Requires solder installation. Low-Off-High.
|
|
|
|
| L12VU |
Laube Universal 12V Power Cord/Transformer
OEM Upgrade Replacement Transformer/Cord Assembly. Fits all models including cordpacks.
|
|
|
|
| LCP2SP |
Laube Cordpack Plus for Lazor/Cowboy
OEM Replacement Cordpack Plus. Includes transformer, cord, 2 speed switch and Cordpack Housing. Fits Lazor and Cowboy
|
|
|
|
| LCPVSP |
Laube Variable Speed Cordpack Plus
OEM Replacement Cordpack Plus. Includes transformer, cord, variable speed switch and Cordpack Housing. Fits Lazor and Cowboy
|
|
|
|
| ABDScrews |
Andis Blade Drive Screw Pkg (Pair of 2)
Andis Blade Drive Screw Pkg (Pair of 2) Fits all
|
|
|
|
| AHScrews |
Andis Hinge Screws Pkg (Pair of 2)
Andis Hinge Screws (Pair of 2) fits all models
|
|
|
|
| AAG2BKit |
Brush Replacement Kit for AG and AG2
Brush Replacement Kit for AG and AG2
|
|
|
|
| AAGCBKit |
Brush Replacement Kit for AGC, AGP and Ultra Edge
Brush Replacement Kit fits AGC, AGP and Ultra Edge
|
|
|
|
| A64537 |
Andis Hinge and Latch for AGC
Hinge Latch/Blade Lock for all Andis AGC, AGCL, AGP and Ultra Edge models.
|
|
|
|
| AS27164 |
Andis AG, AG2 Hinge Assembly
Hinge assembly for Andis AG & AG2 clippers.
|
|
|
|
| AHTS |
Andis Hinge Tensioner Spring
Tensioner spring is installed beneath the hinge on all AG and AG2 models. Increases hinge spring pressure.
|
|
|
|
| AS20651 |
Andis 4x4 Blade Drive.
Replacement blade drive fits all Andis Professional Clippers.
|
|
|
|
| ADRIVECAM |
Andis Drive Cam - Fits All
DRIVE CAM FITS ALL ANDIS PROFESSIONAL CLIPPERS.
|
|
|
|
| AAGCTMF |
Andis Top Motor Frame for AGC
Top Motor Frame for AGC
|
|
|
|
| AAG2MF |
Andis AG2 Top Motor Mount
Top Motor Mount for AG and AG2
|
|
|
|
| A27263 |
Andis AG2 2 speed Top and Bottom Lid (Black)
Andis AG2 2 speed Top and Lower Lid (Black)
|
|
|
|
| A22658 |
Andis AG2 Super 2 Top and Lower Lid (Burgundy)
Andis AG2 Super 2 Top and Lower Lid (Burgundy)
|
|
|
|
| AAGCHousing3 |
AGC Black 2sp Top, Bottom and Blade Drive Cover
Top, Bottom and Blade Drive Cover (Black) fits AGC 2sp. All 3 Pieces.
|
|
|
|
| AAGCS2Cover3 |
AGC Burgundy Super 2 Top, Bottom,Blade Drive Cover
Top, Bottom and Blade Drive cover for Burgundy AGC Super 2.
|
|
|
|
| AAG2Screws |
Andis AG, AG2, AGC Cover Screws (Set of 4)
Andis AG, AG2, AGC cover screws (Set of 4) 2long 2 short
|
|
|
|
| AAG2BH |
Brush Housing for AG and AG2
Brush housing fits all AG and AG2.
|
|
|
|
| AAGCBH |
Brush Housing for AGC, AGP and Ultra Edge
Brush Housing fits all AGC, AGP and Ultra Edge
|
|
|
|
| AAGCBC |
Brush Clips for AGC, AGP, Ultra Edge (Pair of 2)
Brush Retaining Clips for AGC, AGP and Ultra Edge
|
|
|
|
| AAGCCORD |
Cord for all AGC, AGP Models
Replacement Cord fits all AGC, AGP Models
|
|
|
|
| AAG2CORD |
Cord for AG and AG2
Replacement Cord used on all Andis AG and AG2 Models
|
|
|
|
| A63075 |
ANDIS CORDPACK ADAPTER TRANS/CORD
Transformer/14ft Cord for AGR & AGRC models.
|
|
|
|
| A21366 |
Andis AG, AG2 1 speed switch
Andis AG, AG2 single speed swith w/board
|
|
|
|
| A22682 |
Andis 1 speed switch for AGC
1 speed switch for Andis AGC, BGC, AGCL AGP and Ultra Edge. Complete with circuit board.
|
|
|
|
| A20024 |
Andis AG, AG2 2speed switch w/board
Andis AG/AG2 2 speed switch
|
|
|
|
| A22681 |
Andis 2 speed switch for AGC
2 speed switch for Andis AGC, BGC, AGCL AGP and Ultra Edge. Complete with circuit board.
|
|
|
|
| WLF101 |
WOLFF 8 3/4" STRAIGHT GROOMING SHEAR
8 3/4" WOLFF® Straight Grooming Shearr w/zinc die cast handles. Very Lightweight- Made in the USA.
420 HC stainless steel blades. Designed to handle your toughest cutting problems. Designed for optimum performance in cutting.
|
|
|
|
| WLF102 |
WOLFF 8 3/4" CURVED GROOMING SHEAR
8 3/4" WOLFF® Curved Grooming Shears w/zinc die cast handles. Very Lightweight- Made in the USA.
420 HC stainless steel blades. Designed to handle your toughest cutting problems.
|
|
|
|
| WLF103 |
WOLFF 7.125" STRAIGHT BALL TIP GROOMING SHEARS
7 1/8" WOLFF® Ball tip straight blades with polypropylene handles, 3 1/4" Cut Length - Made in the USA. 420 HC stainless steel blades. Designed to handle your toughest cutting problems. designed for optimum performance in cutting
|
|
|
|
| WLF104 |
WOLFF 7" CURVED BALL TIP GROOMER SHEARS
7" WOLFF® Ball tip curved blades with Polypropylene handles, 3 1/4" Cut Length - Made in the USA. 420 HC stainless steel blades. Designed to handle your toughest cutting problems. Designed for optimum performance in cutting.
|
|
|
|
| WLF112 |
WOLFF 8 1/2" STRAIGHT FILLIPINO GROOMER SHEARS
8 1/2" WOLFF® Straight Fillipino Grooming Shear ht- Made in the USA. Our best selling Groomer Shear.
420 HC stainless steel. Designed to handle your toughest cutting problems.
|
|
|
|
| WLF113 |
WOLFF 8 3/8" FILLIPINO CURVED GROOMING SHEAR
8 3/8" WOLFF® Fillipino Straight Grooming Shear . Made in the USA. Made to last. 420 HC stainless steel. Designed to handle your toughest cutting problems.
|
|
|
|
| WLF112BH |
WOLFF 8 3/8" FILLIPINO BENT HANDLE GROOMING SHEAR
8 1/2" WOLFF® Straight Grooming Shear w/bent handles. Made in the USA. 420 HC stainless steel. Designed for optimum performance in cutting.
|
|
|
|
| WLF113BH |
WOLFF 8 3/8"CURVED FILLIPINO, BENT HANDLES
8 3/8" WOLFF® Curved, Bent Handle Grooming Shear. Made in the USA. Made to last.
420 HC stainless steel. Designed to handle your toughest cutting problems.
|
|
|
|
| MSGRSS |
MITYSHARP BRAND 7" STRAIGHT GROOMER SHEARS
Bevel edge straight grooming shears. Lightweight but durable. Polished edge.
|
|
|
|
| MSTHIN |
MITYSHARP BRAND 6.5" COARSE THINNERS
Coarse thinners are handy for quick flicking of fur. 420C Stainless Steel holds edge. Built in finger tang.
|
|
|
|
| WLF105 |
WOLFF 6.5" 30 TOOTH GROOMING THNNER
6 1/2" WOLFF® 30 tooth thinner with polypropylene handles. 2 5/8" Cut Length - Made in the USA.
420 HC stainless steel blades. Designed to handle your toughest cutting problems. Designed for optimum performance in cutting.
|
|
|
|
| ZX6TH |
ZX 6" 30 TOOTH THINNERS
ZX 30 Tooth Thinners. High quality at affordable price. Hamiguri cutting edge with
adjustable tension.
|
|
|
|
| WLF638 |
WOLFF 6 1/2" 35 TOOTH GROOMER THINNERS
Wolff 6 1/2" 35 Tooth Thinner. Heavy Duty construction for years of use. Ergonomic hand design. From the Dominican Republic.
|
|
|
|
| BC40 |
Geib Buttercut #40 SS Blade
BUTTERCUT #40 SS FINISH BLADE. USE THIS BLADE FOR EXTREMELY CLOSE CUTS, PRE-OP SHAVE DOWN.
|
|
|
|
| BC30 |
Geib Buttercut #30 SS Blade
BUTTERCUT #30 SS FINISH BLADE. USE THIS BLADE WITH SNAP-ON COMBS.
|
|
|
|
| BC15 |
Geib Buttercut #15 SS Blade
BUTTERCUT #15 SS FINISH BLADE
|
|
|
|
| BC10 |
Geib Buttercut #10 SS Blade
BUTTERCUT #10 SS FINISH BLADE
|
|
|
|
| BC58T |
Geib Buttercut #5/8 SS Toe Blade
5/8" CUTTING WIDTH FOR GROOMING BETWEEN PAW PADS
|
|
|
|
| BC9 |
Geib Buttercut #9 SS Blade
BUTTERCUT #9 SS FLUTED FINISH BLADE
|
|
|
|
| BC85 |
Geib Buttercut #8.5 SS Blade
BUTTERCUT #8.5 SS FINISH BLADE
|
|
|
|
| BC7F |
Geib Buttercut #7F SS Blade
BUTTERCUT #7F SS FINISH BLADE
|
|
|
|
| BC7 |
Geib Buttercut #7 SS Blade
BUTTERCUT #7F SS FINISH BLADE
|
|
|
|
| BC5F |
Geib Buttercut #5F SS Blade
BUTTERCUT #5F SS FINISH BLADE
|
|
|
|
| BC5 |
Geib Buttercut #5 SS Blade
BUTTERCUT #5 SS SKIP TOOTH BLADE
|
|
|
|
| BC4F |
Geib Buttercut #4F SS Blade
BUTTERCUT #4F SS FINISH BLADE
|
|
|
|
| BC4 |
Geib Buttercut #4 SS Blade
BUTTERCUT #4 SS SKIP TOOTH BLADE
|
|
|
|
| BC3F |
Geib Buttercut 3F SS Blade
BUTTERCUT #3F SS FINISH BLADE
|
|
|
|
| BC3 |
Geib Buttercut #3 SS Blade
BUTTERCUT #3 SKIP TOOTH
|
|
|
|
| RSGSBEV |
Resharpen Groomer Shears (Bevel Edge)
Bevel edge Groomer Shear Resharpening. Mail-In Price. Free return shipping on sharpening orders >$100. Straights, curved and thinners.
|
|
|
|
| RSGB |
Resharpen Groomer Clipper Blades
We resharpen you old/dull Groomer Blades. Free return shipping on R/S orders of $100 or more. Mail-In Price.
|
|
|
|
| RSSS |
Resharpen Stylist/Salon Shears (Mail-In)
Resharpen Salon/Stylist Shears. Mail-In Price.
|
|
|
|
| WLF100-5 |
WOLFF 5" STRAIGHT HANDLE SALON SHEARS
5" Straight Handle Beauty Salon Shear
Cast from 440C Stainless Steel and hardened to 60 RH. Hollow Ground on the Inside and Convexed on the outside. Smooth Action! Cuts like a Dream! For the discerning Professional.
|
|
|
|
| WLF204-5 |
WOLFF 5" EZ GRIP SALON SHEARS
5" EZ Grip Handle Salon Shears
Cast from 440C Stainless Steel and Hardened to 60 Rockwell. Hollow Ground Blades on the Inside and Convexed on the Front. Smooth Action! Cuts like a Dream!
|
|
|
|
| WLF204-55 |
WOLFF 5.5" EZ GRIP SALON SHEAR
5.5" Easy Grip Handle Beauty Salon Shear
Cast from 440C Stainless Steel and hardened to 60 RH. Hollow Ground on the Inside and Convexed on the outside. Smooth Action! Cuts like a Dream! For the discerning Professional.
|
|
|
|
| WLF204--6 |
WOLFF 6" EZ GRIP SALON SHEARS
6" Easy Grip Handle Beauty Salon Shear
Cast from 440C Stainless Steel and hardened to 60 RH. Hollow Ground on the Inside and Convexed on the outside. Smooth Action! Cuts like a Dream! For the discerning Professional.
|
|
|
|
| WLF205-5 |
WOLFF 5" CLASSIC INLINE SALON SHEAR
5" CLASSIC INLINE DESIGN SALON SHEAR
Cast from 440c Stainless Steel and Hardened to 60 RH. Hollow Ground on the Inside and Convexed on the outside. Smooth Action! Cuts like a Dream! For the discerning Professional
|
|
|
|
| WLF205-55 |
WOLFF 5.5" CLASSIC INLINE SALON SHEARS
5.5" CLASSIC INLINE DESIGN SALON SHEAR
Made in Taiwan Cast from 440c Stainless Steel and Hardened to 60 RH. Hollow Ground on the Inside and Convexed on the outside. Smooth Action! Cuts like a Dream! For the discerning Professional
|
|
|
|
| WLF205-6 |
WOLFF 6" CLASSIC INLINE SALON SHEAR
6.0" CLASSIC INLINE DESIGN SALON SHEAR
Cast from 440c Stainless Steel and Hardened to 60 RH. Hollow Ground on the Inside and Convexed on the outside. Smooth Action! Cuts like a Dream! For the discerning Professional
|
|
|
|
| WLF206--5 |
WOLFF 5" BUTTERFLY HANDLE SALON SHEARS
5" Butterfly Handle. Cast from 440C Stainless Steel and Hardened to 60 RH. Hollow Ground on the Inside and Convexed on the outside. Smooth Action! Cuts like a Dream! Ergonomic Rings. For the discerning Professional
|
|
|
|
| WLF206-55 |
WOLFF 5.5" BUTTERFLY HANDLE SALON SHEARS
5.5" Butterfly Handle Salon Shear
Cast from 440C Stainless Steel and Hardened to 60 RH. Hollow Ground on the Inside and Convexed on the outside. Smooth Action! Cuts like a Dream! Ergonomic Rings. For the discerning Professional
|
|
|
|
| WLF206-6 |
WOLFF 6" BUTTERFLY HANDLE SALON SHEAR
6" Butterfly Handle. Cast from 440C Stainless Steel and Hardened to 60 RH. Hollow Ground on the Inside and Convexed on the outside. Smooth Action! Cuts like a Dream! Ergonomic Rings. For the discerning Professional
|
|
|
|
| WLF207-65 |
WOLFF 6.5" INLINE EZGRIP W/TENSION KNOB
6 1/2" EZ Inline Handle Salon Shear
2 1/2" Cut Length - Cast from 440C Stainless Steel and Hardened to 60 RH. Hollow Ground Smooth Action! Cuts like a Dream! Offset rings to lower shoulder. For the discerning Professional
|
|
|
|
| WLF208-55CH |
WOLFF 5.5" 13 TOOTH SALON CHUNKER
6 1/4" 13 Tooth Texturizing Salon Chunker
2 1/4" Cut Length - Cast from 440C Stainless Steel and Hardened to 60 RH. Hollow Ground Smooth Action! Cuts like a Dream! For the discerning Professional
|
|
|
|
| WLF209-5 |
WOLFF 5" CLASSIC DESIGN SALON SHEAR
5" Classic Style Beauty Shear W/Tension Knob
Cast from 440C Stainless Steel and Hardened to 60 RH. Hollow Ground Smooth Action! Cuts like a Dream! Offset rings gets your shoulder down. For the discerning Professional.
|
|
|
|
| WLF209-55 |
WOLFF 5.5" CLASSIC DESIGN SALON SHEAR
5.5" Classic Style Beauty Shear W/Tension Knob
Made in Taiwan Cast from 440C Stainless Steel and Hardened to 60 RH. Hollow Ground Smooth Action! Cuts like a Dream! Offset rings gets your shoulder down. For the discerning Professional.
|
|
|
|
| WLF209-6 |
WOLFF 6" CLASSICAL DESIGN SALON SHEAR
6" Classic Design Salon Shear W/Tension Knob
Cast from 440C Stainless Steel and Hardened to 60 RH. Hollow Ground Smooth Action! Cuts like a Dream! Offset rings gets your shoulder down. For the discerning Professional.
|
|
|
|
| WLF210-55 |
WOLFF 5.5" SWIVEL THUMB SALON SHEARS
5.5" Swivel Thumb Salon Shear. Cast from 440C Stainless Steel and Hardened to 60 RH. Hollow Ground Smooth Action! Offset Design gets shoulder down and swivel dissipates thumb/wrist fatigue. For the discerning Professional.
|
|
|
|
| WLF211-6T |
WOLFF 6.5" OFFSET HANDLE 27 TOOTH THINNERS
6 1/2" Offset Handle 27 Tooth Thinning Shears
Cast from 440C Stainless Steel and Hardened to 60 RH. Hollow Ground oSmooth Action! Cuts like a Dream! Built to last. For the discerning Professional
|
|
|
|
| WLF212-5TC |
WOLFF 5.5" 5 TOOTH SALON CHUNKER
5.5" 5 Tooth Salon Chunking Thinner. Cast from 440C Stainless Steel and Hardened to 60 RH. Hollow Ground Smooth Action! Cuts like a Dream! For the discerning Professional.
|
|
|
|
| WLFOOK427L |
WOLFF OOKAMI 6" TRUE LEFTY THINNERS
6" WOLFF® OOKAMI® True Left Hand 35 Tooth Thinning Shears. 2 3/8" Cut Length -True Left Hand Thinning Shears. 440C Stainless Steel Hollow ground inside - Convex edge outside. For the discerning professional.
|
|
|
|
| ZAMCG |
ZAMAHA 6" CAROLINA GIRL SALON SHEARS
From Zamaha, in Sialkot, Pakistan. Finely crafted 440C Convex Salon Shears. Labeled "Carolina Girl".
Smooth sure action, smooth cut. Offset ergonomic swept handles.
|
|
|
|
| PROFISH |
PROLINE 6.5" FISHBONE SALON SHEARS
High quality 440C Stainless Steel construction. From China. Unique "Fishbone" design allows use as a shear and a razor as well. Jeweled pivot and ergo grip, one piece tang.
|
|
|
|
| OHSCREWS |
OSTER A5 HINGE SCREWS (2 ea)
Pair of hinge screws. Fits all.
|
|
|
|
| OH&L |
OSTER A5 BLADE HINGE AND LATCH ASSEMBLY
Contains new hinge, latch and screws for the Oster A5's, including Goldens and Turbos
|
|
|
|
| ODLEVR |
OSTER A5 DRIVE LEVER
New drive lever fits all A5 models.
|
|
|
|
| OLINK |
OSTER A5 DRIVE LINK
Drive link fits all A5 models.
|
|
|
|
| OBBEAR2 |
OSTER A-5 BRONZE BEARINGS W/FELT WASHERS (2 PAIR)
Bronze bearings fit all A5 models. Two bearings and two felt washers required.
|
|
|
|
| OBRUSH |
OSTER A5 REPLACEMENT BRUSH SET
Fits all A5 models built after 1985. Kit contains 2 brushes, holders and new springs.
|
|
|
|
| OCORD |
OSTER A5 REPLACEMENT CORD
Fits all A5 models.
|
|
|
|
| OFGEAR |
OSTER A5 FIBER DRIVE GEAR
Fiber drive gear fits 1 and 2 speed A5 models.
|
|
|
|
| OECAP |
OSTER A5 END CAP WITH SCREENS
New black A5 end cap with new screens. Fits toggle switch only.
|
|
|
|
| OHOUS |
OSTER A5 NEW HOUSING
New black housing for A5.
|
|
|
|
| WLF100-5 |
WOLFF 5" STRAIGHT HANDLE SALON SHEARS
5" Straight Handle Beauty Salon Shear
Cast from 440C Stainless Steel and hardened to 60 RH. Hollow Ground on the Inside and Convexed on the outside. Smooth Action! Cuts like a Dream! For the discerning Professional.
|
|
|
|
| WLF204-5 |
WOLFF 5" EZ GRIP SALON SHEARS
5" EZ Grip Handle Salon Shears
Cast from 440C Stainless Steel and Hardened to 60 Rockwell. Hollow Ground Blades on the Inside and Convexed on the Front. Smooth Action! Cuts like a Dream!
|
|
|
|
| WLF204-55 |
WOLFF 5.5" EZ GRIP SALON SHEAR
5.5" Easy Grip Handle Beauty Salon Shear
Cast from 440C Stainless Steel and hardened to 60 RH. Hollow Ground on the Inside and Convexed on the outside. Smooth Action! Cuts like a Dream! For the discerning Professional.
|
|
|
|
| WLF204--6 |
WOLFF 6" EZ GRIP SALON SHEARS
6" Easy Grip Handle Beauty Salon Shear
Cast from 440C Stainless Steel and hardened to 60 RH. Hollow Ground on the Inside and Convexed on the outside. Smooth Action! Cuts like a Dream! For the discerning Professional.
|
|
|
|
| WLF205-5 |
WOLFF 5" CLASSIC INLINE SALON SHEAR
5" CLASSIC INLINE DESIGN SALON SHEAR
Cast from 440c Stainless Steel and Hardened to 60 RH. Hollow Ground on the Inside and Convexed on the outside. Smooth Action! Cuts like a Dream! For the discerning Professional
|
|
|
|
| WLF205-55 |
WOLFF 5.5" CLASSIC INLINE SALON SHEARS
5.5" CLASSIC INLINE DESIGN SALON SHEAR
Made in Taiwan Cast from 440c Stainless Steel and Hardened to 60 RH. Hollow Ground on the Inside and Convexed on the outside. Smooth Action! Cuts like a Dream! For the discerning Professional
|
|
|
|
| WLF205-6 |
WOLFF 6" CLASSIC INLINE SALON SHEAR
6.0" CLASSIC INLINE DESIGN SALON SHEAR
Cast from 440c Stainless Steel and Hardened to 60 RH. Hollow Ground on the Inside and Convexed on the outside. Smooth Action! Cuts like a Dream! For the discerning Professional
|
|
|
|
| WLF206--5 |
WOLFF 5" BUTTERFLY HANDLE SALON SHEARS
5" Butterfly Handle. Cast from 440C Stainless Steel and Hardened to 60 RH. Hollow Ground on the Inside and Convexed on the outside. Smooth Action! Cuts like a Dream! Ergonomic Rings. For the discerning Professional
|
|
|
|
| WLF206-55 |
WOLFF 5.5" BUTTERFLY HANDLE SALON SHEARS
5.5" Butterfly Handle Salon Shear
Cast from 440C Stainless Steel and Hardened to 60 RH. Hollow Ground on the Inside and Convexed on the outside. Smooth Action! Cuts like a Dream! Ergonomic Rings. For the discerning Professional
|
|
|
|
| WLF206-6 |
WOLFF 6" BUTTERFLY HANDLE SALON SHEAR
6" Butterfly Handle. Cast from 440C Stainless Steel and Hardened to 60 RH. Hollow Ground on the Inside and Convexed on the outside. Smooth Action! Cuts like a Dream! Ergonomic Rings. For the discerning Professional
|
|
|
|
| WLF207-65 |
WOLFF 6.5" INLINE EZGRIP W/TENSION KNOB
6 1/2" EZ Inline Handle Salon Shear
2 1/2" Cut Length - Cast from 440C Stainless Steel and Hardened to 60 RH. Hollow Ground Smooth Action! Cuts like a Dream! Offset rings to lower shoulder. For the discerning Professional
|
|
|
|
| WLF208-55CH |
WOLFF 5.5" 13 TOOTH SALON CHUNKER
6 1/4" 13 Tooth Texturizing Salon Chunker
2 1/4" Cut Length - Cast from 440C Stainless Steel and Hardened to 60 RH. Hollow Ground Smooth Action! Cuts like a Dream! For the discerning Professional
|
|
|
|
| WLF209-5 |
WOLFF 5" CLASSIC DESIGN SALON SHEAR
5" Classic Style Beauty Shear W/Tension Knob
Cast from 440C Stainless Steel and Hardened to 60 RH. Hollow Ground Smooth Action! Cuts like a Dream! Offset rings gets your shoulder down. For the discerning Professional.
|
|
|
|
| WLF209-55 |
WOLFF 5.5" CLASSIC DESIGN SALON SHEAR
5.5" Classic Style Beauty Shear W/Tension Knob
Made in Taiwan Cast from 440C Stainless Steel and Hardened to 60 RH. Hollow Ground Smooth Action! Cuts like a Dream! Offset rings gets your shoulder down. For the discerning Professional.
|
|
|
|
| WLF209-6 |
WOLFF 6" CLASSICAL DESIGN SALON SHEAR
6" Classic Design Salon Shear W/Tension Knob
Cast from 440C Stainless Steel and Hardened to 60 RH. Hollow Ground Smooth Action! Cuts like a Dream! Offset rings gets your shoulder down. For the discerning Professional.
|
|
|
|
| WLF210-55 |
WOLFF 5.5" SWIVEL THUMB SALON SHEARS
5.5" Swivel Thumb Salon Shear. Cast from 440C Stainless Steel and Hardened to 60 RH. Hollow Ground Smooth Action! Offset Design gets shoulder down and swivel dissipates thumb/wrist fatigue. For the discerning Professional.
|
|
|
|
| WLF211-6T |
WOLFF 6.5" OFFSET HANDLE 27 TOOTH THINNERS
6 1/2" Offset Handle 27 Tooth Thinning Shears
Cast from 440C Stainless Steel and Hardened to 60 RH. Hollow Ground oSmooth Action! Cuts like a Dream! Built to last. For the discerning Professional
|
|
|
|
| WLF212-5TC |
WOLFF 5.5" 5 TOOTH SALON CHUNKER
5.5" 5 Tooth Salon Chunking Thinner. Cast from 440C Stainless Steel and Hardened to 60 RH. Hollow Ground Smooth Action! Cuts like a Dream! For the discerning Professional.
|
|
|
|
| WLFOOK427L |
WOLFF OOKAMI 6" TRUE LEFTY THINNERS
6" WOLFF® OOKAMI® True Left Hand 35 Tooth Thinning Shears. 2 3/8" Cut Length -True Left Hand Thinning Shears. 440C Stainless Steel Hollow ground inside - Convex edge outside. For the discerning professional.
|
|
|
|
| WLF101 |
WOLFF 8 3/4" STRAIGHT GROOMING SHEAR
8 3/4" WOLFF® Straight Grooming Shearr w/zinc die cast handles. Very Lightweight- Made in the USA.
420 HC stainless steel blades. Designed to handle your toughest cutting problems. Designed for optimum performance in cutting.
|
|
|
|
| WLF102 |
WOLFF 8 3/4" CURVED GROOMING SHEAR
8 3/4" WOLFF® Curved Grooming Shears w/zinc die cast handles. Very Lightweight- Made in the USA.
420 HC stainless steel blades. Designed to handle your toughest cutting problems.
|
|
|
|
| WLF103 |
WOLFF 7.125" STRAIGHT BALL TIP GROOMING SHEARS
7 1/8" WOLFF® Ball tip straight blades with polypropylene handles, 3 1/4" Cut Length - Made in the USA. 420 HC stainless steel blades. Designed to handle your toughest cutting problems. designed for optimum performance in cutting
|
|
|
|
| WLF104 |
WOLFF 7" CURVED BALL TIP GROOMER SHEARS
7" WOLFF® Ball tip curved blades with Polypropylene handles, 3 1/4" Cut Length - Made in the USA. 420 HC stainless steel blades. Designed to handle your toughest cutting problems. Designed for optimum performance in cutting.
|
|
|
|
| WLF105 |
WOLFF 6.5" 30 TOOTH GROOMING THNNER
6 1/2" WOLFF® 30 tooth thinner with polypropylene handles. 2 5/8" Cut Length - Made in the USA.
420 HC stainless steel blades. Designed to handle your toughest cutting problems. Designed for optimum performance in cutting.
|
|
|
|
| WLF112 |
WOLFF 8 1/2" STRAIGHT FILLIPINO GROOMER SHEARS
8 1/2" WOLFF® Straight Fillipino Grooming Shear ht- Made in the USA. Our best selling Groomer Shear.
420 HC stainless steel. Designed to handle your toughest cutting problems.
|
|
|
|
| WLF112BH |
WOLFF 8 3/8" FILLIPINO BENT HANDLE GROOMING SHEAR
8 1/2" WOLFF® Straight Grooming Shear w/bent handles. Made in the USA. 420 HC stainless steel. Designed for optimum performance in cutting.
|
|
|
|
| WLF113 |
WOLFF 8 3/8" FILLIPINO CURVED GROOMING SHEAR
8 3/8" WOLFF® Fillipino Straight Grooming Shear . Made in the USA. Made to last. 420 HC stainless steel. Designed to handle your toughest cutting problems.
|
|
|
|
| WLF113BH |
WOLFF 8 3/8"CURVED FILLIPINO, BENT HANDLES
8 3/8" WOLFF® Curved, Bent Handle Grooming Shear. Made in the USA. Made to last.
420 HC stainless steel. Designed to handle your toughest cutting problems.
|
|
|
|
| SE90067 |
LAUBE® MAGNUM FORCE DRYER FILTER
Factory Replacement Filters for the Magnum Force Dryer. Sold individually.
|
|
|
|
| UA3100 |
MAGNUM FORCE DRYER FILTER COVER
Keeper Plate for the Magnum Force Dryer filter. Requires one.
|
|
|
|
| UA3102 |
MAGNUM FORCE FRONT DRYER BEZEL
OEM replacement for the front bezel on the Magnum Force Dryer.
|
|
|
|
| UA3103 |
MAGNUM FORCE DRYER FEET(EA)
Replacement feet for the Magnum Force Dryer.
|
|
|
|
| SE90010 |
MAGNUM FORCE DRYER HOSE FLAT NOZZLE
Flat Hose End Nozzle for the Magnum Force Dryer
|
|
|
|
| SE90020 |
MAGNUM FORCE DRYER HOSE TAPERED NOZZLE
Tapered Hose End Nozzle for the Magnum Force Dryer.
|
|
|
|
| SE90030 |
MAGNUM FORCE DRYER HOSE ROUND NOZZLE
Round Hose End Nozzle for the Magnum Force Dryer.
|
|
|
|
| SE90040 |
LAUBE® MAGNUM FORCE HOSE
Replacement Hose for the Magnum Force Dryer. 10ft length.
|
|
|
|
| SE90050 |
MAGNUM FORCE DRYER MOTOR BRUSHES (SET OF 2)
OEM Replacement Motor Brush Set. Pair of 2.
|
|
|
|
| SE90065 |
MAGNUM FORCE ON/OFF SWITCH
OEM Replacement Switch for the Magunm Force dryer.
|
|
|
|
| SE90060 |
MAGNUM FORCE® VSP/POT AND CIRCUIT BOARD
Variable Speed Potentiometer and Circut Board Assembly for the Magnum Force Dryer. OEM.
|
|
|
|
